所有新闻和项目

MaxiDive completed an underwater photo inspection at Laem Chabang Port, Thailand, documenting hull plating condition, marine growth, appendages, bow thruster gratings, propeller assemblies, rope guard, stern tube seal, rudder condition, and anode status for technical review.

MaxiDive completed a propeller polishing operation at Koh Si Chang Anchorage for a container vessel, using professional underwater equipment to restore the propeller blade surface and support vessel efficiency without dry docking.

MaxiDive completed an underwater oil stain inspection in Thailand at Koh Si Chang Anchorage, confirming the condition of the vessel’s bulbous bow, vertical sides, and rudder area. The inspection verified that no oil stain remained below the waterline and that only minor superficial marks were observed above the waterline.

MaxiDive completed a scrubber inspection Thailand project at Laem Chabang Port, including underwater inspection of the scrubber overboard discharge, hull condition assessment, and propeller polishing support while the vessel remained afloat.

MaxiDive completed an underwater plugging Thailand project at Koh Si Chang Anchorage. The operation supported discharge valve replacement by locating and temporarily plugging multiple overboard discharges while the vessel remained afloat.

MaxiDive completed a rudder clearance measurement Thailand project at Laem Chabang Port. Divers performed CCTV-recorded underwater clearance measurements at six marked positions between the rudder upper and lower plates using vessel-provided steel measurement tools.

MaxiDive completed an underwater external plugging Thailand operation to seal an overboard discharge and enable safe onboard valve replacement. The repair was executed efficiently without dry docking, ensuring no leakage, minimal downtime, and full operational safety of the vessel.

Professional in-water survey in Thailand under ABS Class supervision with full underwater inspection of hull, appendages, propeller, and rudder systems.

MaxiDive successfully performed an in-water survey in Thailand with ABS Class, delivering certified underwater inspection services directly in port conditions.

MaxiDive completed underwater speed log replacement in Thailand in cooperation with FURUNO Service, delivering efficient in-water solutions without dry-docking.

Professional hull cleaning and propeller polishing services in Thailand to improve vessel efficiency, reduce fuel consumption, and ensure compliance with industry standards.

Professional propeller polishing and underwater inspection services in Thailand to improve vessel performance, efficiency, and compliance.